Benchtop pH Meter Dissolved Oxygen Meter Temp Tester Water Quality Monitor USB

Description

Benchtop pH Meter Dissolved Oxygen Meter Temp Tester Water Quality Monitor USB
!!!!!Liquid /Powder are Not Included During The Shipping!!!
(ORP electrode is optional accessories, please contact me if you need)
Multi parameter pH/dissolved oxygen meter contains 11 options, the meter is used for measuring the pH, ORP and dissolved oxygen.
pH Mode:
• Multiparameter pH/dissolved oxygen meter is equipped with a large backlit LCD display.
• 1 to 5 points calibration with automatic recognition for USA, NIST and DIN buffers.
• Automatic electrode diagnosis shows the pH slope and offset.
ORP Mode
(ORP electrode is optional accessories, please contact me if you need)
• 1 point offset calibration allows adjusting the displayed value to a known standard.
• Relative and absolute millivolt modes ensure the reliable ORP measurements.
Dissolved Oxygen Mode:
• 1 or 2 points calibration using the air-saturated water or zero oxygen solution.
• Salinity and barometric pressure compensations eliminate the measurement error.
Other Features:
• Automatic temperature compensation ensures accurate readings over the entire range.
• Auto-Read function senses and locks the measurement endpoint.
• Calibration due alarm prompts user to calibrate the meter regularly.
• Setup menu allows setting the number of calibration points, stability criteria, temperature
unit, date and time, auto-power off, etc.
• Reset function automatically resumes all settings back to the factory defaults.
• Expanded memory stores or recalls up to 500 data sets.
• USB communication interface for data transfer and timed interval readings.
Specification:
pH
Range
-2.000 to 20.000pH
Resolution
0.001, 0.01, 0.1pH, selectable
Accuracy
±0.002pH
Calibration Points
1 to 5 points
pH Buffer Options
USA, NIST, DIN, 2 custom buffers
ORP
Range
±1999.9mV
Resolution
0.1, 1mV, selectable
Accuracy
±0.2mV
Calibration Points
1 point
Measurement Modes
Relative or absolute mV
Dissolved Oxygen
DO Range
0.00 to 20.00mg/L
Resolution
0.01, 0.1mg/L, selectable
Accuracy
±0.2mg/L
% Saturation of Oxygen
0.0 to 200.0%
Resolution
0.1, 1%, selectable
Accuracy
±2.0%
Calibration Points
1 or 2 points
Pressure Correction
60.0 to 112.5kPa/450 to 850mmHg, manual
Salinity Correction
0.0 to 50.0g/L, manual
Temperature
Range
0 to 105°C/32 to 221°F
Resolution
0.1°C/0.1°F
Accuracy
±0.5°C/±0.9°F
Offset Calibration
1 point
Calibration Range
Reading ±10°C
General Specifications
Temperature Compensation
0 to 100°C/32 to 212°F, manual or automatic
Stability Criteria
Low or high
Calibration Due Alarm
1 to 31 days or off
Memory
Stores up to 500 data sets
Output
USB communication interface
Connector
BNC, 6-pin nimi-DIN, 3.5mm jack socket
Display
Custom LCD (125×100mm)
Power
DC5V, using AC adapter, 220V/50Hz
Dimensions
210(L)×188(W)×60(H)mm
Weight
1.5kg
Accessories
Host
E201-BNC pH electrode
DO100 dissolved oxygen electrode
TP-10K temperature probe
DO membrane cap
USB cable
DC5V power adapter