Conductivity Meter Tester Controller Temp TDS Tester Water Quality Monitor

Description

Conductivity Meter Industrial Online Conductivity Controller Temp TDS Tester
Industrial online conductivity controller, 1 to 3 points calibration, 4 to 20mA outputs. The meter is suitable for monitoring the conductivity and TDS of the water quality.
Feature:
• Economical online conductivity controller comes with a platinum conductivity electrode.
• 1 to 3 points calibration with automatic recognition for conductivity standards.
• Selectable cell constant, temperature coefficient and TDS conversion factor.
• Automatic temperature compensation ensures accurate readings over the entire range.
• Setup menu allows setting the number of calibration points, alarm limits, hysteresis value,
4 to 20mA output, etc.
• Reset function automatically resumes all settings back to the factory defaults.
Specifications:
Conductivity
Range
0.01~20.00, 200.0, 2000µS/cm, 20.00, 200.0mS/cm
Accuracy
±1% F.S
Resolution
0.001, 0.01, 0.1, 1, automatic
Calibration Points
1 to 3 points
Calibration Solutions
84uS/cm, 1413uS/cm, 12.88mS/cm, 111.8mS/cm
TDS
Range
0~10.00, 100.0, 1000ppm, 10.00, 100.0ppt (Max. 200ppt)
Accuracy
±1% F.S
Resolution
0.01, 0.1, 1, automatic
TDS Factor
0.1~1.0 (Default 0.5)
Temperature
Range
0~100°C, 32~212°F
Accuracy
±1°C, ±1.8°F
Resolution
0.1°C, 0.1°F
Offset Calibration
1 point
Calibration Range
Measured value ±10°C
Communication
Signal Output
4~20mA
Load
Max. 500Ω
Low or High Alarm
0.02uS/cm~20.0mS/cm, selectable
Communication Interface
RS485
Connection Terminals
Detachable screw terminals
General
Temperature Compensation
0~100°C, 32~212°F, automatic
Temperature Coefficient
Linear (0.0~10.0%/°C)
Cell Constant
K=0.1, 1, 10
Reference Temperature
25°C
Environmental Conditions
Ambient temperature < 60°C, relative humidity < 80%
Power
DC24V
Dimensions
96(L)×96(W)×75(H)mm
Weight
350g