-40%
Pen Type Conductivity Tester Meter Temp Display Water Quality Monitor Waterproof
$ 66.52
- Description
- Size Guide
Description
Pen Type Conductivity Tester Meter Temperature Display Water Quality AnalyzerBattery/Liquid Not included During the Shipping
Multi-range pocket conductivity meter, 1 to 3 points calibration, setup menu contains 5 options, accuracy: 1% F.S.
Features:
• Multi-range pocket conductivity meter covers the low, mid, high ranges.
• Platinum conductivity cell provides the quick and reliable measurement results.
• 1 to 3 points calibration with automatic recognition for conductivity standards.
• Automatic temperature compensation corrects conductivity measurment to reference
temperature.
• Auto-Read function senses and locks the measurement endpoint.
• Auto-Power Off effectively conserves battery life.
• Setup menu allows setting the number of calibration points, temperature unit, etc.
• Reset function automatically resumes all settings back to the factory defaults.
• Replaceable electrode module reduces maintenance and replacement cost.
• Waterproof feature to ensure complete protection in harsh environments.
Specification:
Model
ECscan20
Conductivity
Range
0 to 20.00, 200.0, 2000µS/cm, 20.00mS/cm
Resolution
0.01, 0.1, 1
Accuracy
±1% F.S.
Calibration Points
1 to 3 points
Calibration Solutions
84µS, 1413µS, 12.88mS
Temperature
Range
0 to 60°C/32 to 140°F
Resolution
0.1°C/0.1°F
Accuracy
±1°C/±1.8°F
Offset Calibration
1 point
Calibration Range
Reading ±10°C
General Specifications
Temperature Compensation
0 to 60°C/32 to 140°F, automatic
Temperature Coefficient
2%/°C, linear
Reference Temperature
25°C
Cell Constant
K=1
Hold Function
Manual or auto-endpoint
Auto-Power Off
8 minutes after last key pressed
Sensor Type
ECSCAN-C1-10K
Display
Dual-line LCD (21×21mm)
Power
2×1.5V AAA batteries
Battery Life
Approximately 200 hours of continuous use
Dimensions
185(L)×40(Dia.)mm
Weight
100g